Muscular Mustangs - View Single Post - 94 v6 vacuum question
View Single Post
post #3 of Old 04-28-2011, 08:03 AM Thread Starter
Junior Member
Join Date: Apr 2011
Posts: 2
Mentioned: 0 Post(s)
Tagged: 0 Thread(s)
Quoted: 0 Post(s)
Re: 94 v6 vacuum question

This one I have circled. It is a tee that one side has been taped off.

If I canít figure out what goes there, (if it is anything at all), I will just replace the tee with an elbow.

I suspect it is causing me a hesitation problem.

When I give it throttle from idle there is a slight hesitation before it revs.

I have had the car one week, it was running pretty rough when I got it.

The previous owner said a friend of his who builds race Mustangs had rebuilt the motor 10k miles ago.

From the looks of the visible gaskets he appears to be telling the truth.

So far I have cleaned MAF, throttle body, EGR, IAC, replaced air filter, fuel filter and ran sea foam through.

It is running tons better but still the small problem.

Tbone is offline  
For the best viewing experience please update your browser to Google Chrome